Aprimatic Flexi 300EL Manual De Instrucciones página 24

7 - PARTIAL OPENING LEARNING PROCEDURE
The pedestrian opening is a partial opening (or total opening, if the installer wants it) of the wing opened by "MOT1" (terminals
24, 25). To manage the pedestrian opening, it is necessary to program a button of the radio transmitter (see paragraph 3B), or
connect a command by wire on the terminals 14,15 (see paragraph 10B).
7A - LEARNING PROCEDURE FOR THE PEDESTRIAN OPENING
The installer can set the pedestrian opening through this procedure.
1. Place the wings in
closing position.
6. Press the command by
wire, the START button, or
the button in the transmitter,
to set the widening of the
pedestrian opening
7. The gate stops and recloses.
END of the learning procedure.
7B - DELETING THE PEDESTRIAN OPENING
The installer can delete the pedestrian opening procedure through this procedure.
1. Place the wings in
closing position.
After the deletion, it will be possible to activate the pedestrian opening only by wire, and the size of the opening will
be total on the wing opened by MOT1 (terminals 24,25)
2. RESET: press
button SET for
2 seconds (the yellow
led flashes).
5. The gate begins to open.
2. RESET: press button SET
for 2 seconds (the yellow led
flashes).
5. END of deletion. The
yellow led turns off.
3. Press START
button
(the yellow led stays on).
4. Within 5 seconds, press a
command by wire, the
START button, or a button
in the transmitter.
3. Press START button
(the yellow led stays on).
4. Press button SET
(the yellow led flashes
quickly).