Tre Spade ATACAMA PRO DELUXE Manual De Instrucciones página 20

English
also be used for meat, meringues or biscuits ba-
king. Not recommended for thin or delicate pro-
ducts. It has 15h duration at maximum temperatu-
re value of 68°C.
A5- PASTA: optimized program for drying fresh pa-
sta. Depending on the type of pasta, the required
drying time could vary; it is therefore recommen-
ded to periodically check the product and stop the
cycle when the result is achieved. It has 20h dura-
tion at an average temperature of 40°C.
A6- ECO: minimizes energy consumption due to a
maximum absorption of 270W. The drying time is
slightly longer, in exchange of considerable energy
savings. Perfect as well for limited power availabi-
lity and for light products which don't get moved
thanks to the low speed of the air flow. It has 30h
duration at maximum temperature value of 45°C.
There are other variables that affect the process.
For instance, the permeability of a fruit determi-
nes substantially the drying timing. The thicker the
peel, the longer the product has to be dried. The
thickness of the slices and the climate surroun-
ding the machine is also very important: in a very
humid environment the dehydrator needs longer
time to dry one and the same product rather than
in a very dry environment.
It is recommended to perform a test drying cycle
to verify the actual drying degree the product rea-
ches at the end of the cycle. Each product has, in
fact, different reactions on the basis of the size,
moisture degree and working environment tem-
perature. Carry out tests on the products most
commonly handled so as to determine prepara-
tion, program and perfect timing.
H0- DELAY: this program is fit to delay the start
of any drying program. The delay allows exploiting
the time bands during which the electric energy con-
sumption is less expensive.
In case a delayed start is to be used, set first this fun-
ction and subsequently the drying program selected.
Setting the DELAY - DELAYED START function:
• Press the key and scroll through the programs
menu until the display shows H0.
• Press the key to select it.
18
• Select the number of delay hours of the cycle start
from H1 to H9 by repeatedly pressing the
• Press the key
• The display shows the selected delay and the LED
blinks.
• Scroll using the
programs and select the desired one.
• Press the key
• The dehydrator stays in stand-by condition
throughout the delay time set up to the start of
the selected cycle. During the delay time the led
stays lit and the display shows alternatively the
initial delay set, the countdown to the start and
the selected program to be started up.
Preservation:
The PRESERVATION mode is enabled at the end of
each cycle (except for the EVO program).
The preservation mode is automatically enabled
and stays active until the dehydrator is manual-
ly switched off, that is when ready to collect and
store the products. The preservation cycle has a
maximum duration of 6 hours and envisages a con-
tinuous, slightly heated air flow that prevents the
food from getting re-hydrated.
During preservation cycle the display shows 00
blinking.
To reset the cycle press and hold the key
seconds until the screen displays (On).
Error messages:
In case of errors or if the dehydrator undergoes da-
mages, the appliance stops completely and displays
one of the following values:
• E1
• E2
• E3
• E4
• E5
In this case the interventions must be carried out exclusi-
vely by the manufacturer through his Technical Assistance
Service or by specialized personnel informed on the risks
arising from operations on powered products. Use exclu-
sively original spare parts, accessories and power cables.
Made in Italy
to confirm the selection.
key through the operation
to confirm the selected program.
key.
for 3