SUOMY X-WING Manual De Instrucciones página 12

EN
WARNING
Thank you for choosing SUOMY.
Designed and manufactured in compliance with the highest qualitative
standards specifically for motorcycle use, X-WING is certified by the
most important Certification Bodies.
Suomy cannot be held responsible for direct or indirect damages
resulting from an incorrect use of the product and/or for using the
helmet in situations that go beyond the normal conditions of use or
the modalities indicated in this booklet.
Before using the helmet, carefully read this manual. Keep it at hand
for future reference.
For further information, contact your Distributor or Suomy.
Use this helmet in compliance with the instructions contained in this
manual. Compliance with these instructions will make your helmet
last longer and will assure maximum product performances.
Modifications and/or alterations to the helmet and/or any of its
components shall make the warranty void and may jeopardize the
safety requirements or make the product non-compliant with the
certification standards.
All the Suomy products are constantly subject to a continual
improvement process, that's why Suomy reserves the right to make
changes, without prior notice, to the product object of this manual.
It is therefore not possible to exercise any rights on the basis of the
information, illustrations and descriptions contained in this manual.
X-WING was developed and tested to assure, together with the safety
features, the best level of comfort and noise reduction during ordinary
conditions of use. However, the particular configuration of the vehicle
and/or the position of the rider or both factors can entail situations
14
that could not be foreseen during the manufacturing of the product
that may generate aerodynamic rustles or hissing sounds.
Suomy therefore, cannot be held responsible if this should occur.
X-WING is not designed to be used with earphones and/or similar
devices.
FEATURES
The inner liner can be totally removed. It is made in excellent anallergic
fabric with anti-bacteria treatment.
All the parts in contact with the face are easily washable.
Interchangeable side cheek pads, available in different thicknesses to
assure the best fit for all head sizes.
The X-WING ventilation system along with the particular shape of the
internal polystyrene shell, optimizes outside and inside air flows, fed
by three air intakes, which exploit the Venturi effect thus optimizing
internal ventilation. The four back air inlets release the air flows. This
assures a more uniform and continuous flow of air inside the shell,
which is also enhanced by the extraction grid on the back part.
The strap has a D-ring retention system in anti-corrosive stainless
steel, and a button on the strap. The fastening stud is positioned in
a completely free and accessible area. The stud is easy to lock and
unlock even with gloves. Thanks to the particular shape of the D-Ring
system, the retention system can be easily disengaged even while
wearing gloves: when the automatic button is fastened, the strap
forms an eyehole that can easily be used as «ring» to pull the tab and
release the D-ring fastening system.