Introduction; This Manual; The Unit - EAS ELECTRIC EBP Serie Manual De Instrucciones

1. INTRODUCTION

1.1 This manual

This manual includes the necessary information about the unit. Please read this manual carefully before
you use and maintain the unit.

1.2 The unit

The swimming pool heat pump is one of the most economical systems to heat the swimming pool
efficiently. Using the free renewable energy from the air and the earth it delivers up to five times more
energy in heating than a traditional heating system such as gas boiler or electric heater. So you will save
4/5 cost of the traditional heating. The swimming pool heat pump lengthens your swimming season and
gives you comfort at high level. You could enjoy swimming not only in summer, but also in spring, autumn
and even winter time.
1. Ecological and economical heating
By making use of the renewable energy in the outside air, it consumes much less energy with low
carbon emission.
2. Titanium heat exchanger
Advanced titanium heat exchanger guarantees long life span of heat pump free from corrosion and
rust. By using of titanium heat exchanger the heat pump could be applied with all types of water
treatment such as chlorinate, iodine, bromine and salt water.
3. Multiple functions
a. Cooling and heating ,Auto functions available;
b. Auto operation, Auto-restart, Auto defrost
c. Wide ambient working condition: -15°C to 46°C
4. Reliable operation
To guarantee the stable running and increase the suability of the unit multiple protection devices
have been set into pool heat pump which include insufficient water flow protection, high/low
pressure protection, overload protection, compressor protection.
5. Safe use
The swimming pool heat pump works without oil, gas or other hazardous substance which avoid
potential risk that goes together. Moreover no gas connection or a fuel tank is needed. No risk of
intoxication, smell or pollution from leakage.
6. Self-diagnosis
When there is malfunction, the swimming pool heat pump will make self-diagnosis by displaying
error code from the control panel. The problem could be found out at a glance.
2
V.2