Introduction; Instructions For Installation - Sammic PCS Manual De Usuario

DEAR CUSTOMER:
We appreciate that you have chosen this product and we assure that you will get the maximum
satisfaction of the new acquisition for your bussines. The scale has been designed to give you a
great deal saving time and money, avoiding losses by human mistakes of interpretation and
calculation, offering you more fluency and security in your commercial tasks.
To make your equipment a long lasting investment, we suggest to read carefully this manual and
make sure to keep it at hand for later consultations. In this manual we indicate the necessary steps
to benefit and prolong your appliances availability.
1. Unpack the scale and check the conditions of the product. If
it is damaged report it inmediately to your authorized
distributor.
2. Place the scale where there is not any movement or
vibration, make sure it is leveled adequately checking that
the four leveling bases are supporting the scale over the
surface were it has been placed and if the level bubble
(under the plate) is centered, to adjust, tighten or loosen
the leveling bases until the bubble is in the center of the
circle.
3. Connect the AC/DC power supply (if you use it) to 220 V
A.C. outlet.
4. Turn the scale on after the countdown sequence your scale
will display zeroes and will be ready to use.
IMPORTANT NOTE: If your scale displays "HELP" after you followed the previous steps and after
the initial countdown, it means that it was handled roughly and/or got hit during the shipment, wich
cause irreversible damage in its operation. Call your authorized distributor. Is possible that the scale
displays "HELP" when you turn it on with weight on the plate, when this happens, remove the weight
and turn the scale off and then turn it on

INTRODUCTION

INSTRUCTIONS FOR INSTALLATION

ENGLISH 5