Agri-Fab 45-01764 Manual Del Usuario página 6

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

For Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983
0. Assemble a cotter pin to the inside hole at one end of
the axle. Place a large flat washer, a wheel and then
another large flat washer onto the axle. Secure the
wheel with a cotter pin assembled to the outside hole
at the end of the axle. Repeat step for other wheel. See
figure 13.
1. Center the wheels and the axle side to side. Tighten
the four nuts on the axle clamps.
AXLE
LARGE
FLAT
WASHER
FIGURE 13
. Turn cart right side up, so that it rests on its wheels.
3. Place front panel in guides to complete assembly.
4. Your cart is now ready to use.
COTTER
PIN
COTTER
PIN
LARGE
FLAT
WHEEL
WASHER
www.mymowerparts.com
ENGLISH
MAINTENANCE
1. Grease or oil wheel bearings occasionally. Use automo-
tive wheel bearing type grease or 0 weight oil.
. Periodically retighten all screws, especially after heavy
use. Do not exceed load capacity rating of 300 lbs.
3. Clean cart thoroughly after each use.
4. Store indoors during severe weather.
5. Apply light coat of varnish to all wood surfaces annu-
ally.
6. Use glossy black enamel spray paint to touch up
scratched or worn painted metal surfaces.
RECOMMENDED TIRE PRESSURE 30-35 PSI
DO NOT EXCEED MAXIMUM PRESSURE PRINTED
ON TIRE
6

Publicidad

Tabla de contenido
loading

Tabla de contenido