Crison In 63 Manual Del Usuario página 21

5. Maintenance
The housing requires no maintenance.
Refer to the sensor's manual fot the maintenance of the sensor installed on the housing. Calibration, cleaning and regenera-
tion treatments of the sensor can be normally perform without being uninstalled of the probe.
CAUTION
When using chemicals or solvents, comply with the instructions of the producer and the general safety rules.
6. Guarantee
Electrodes holder housings are guaranteed against any manufacturing defect or component failure. CRISON will repair or
replace, free of charge, any defective component or parts of housings under guarantee.
The guarantee does not cover damage caused by accident, improper use or internal handling by unauthorized persons.
The guarantee does not cover defects caused by:
- incorrect use
- normal wear
- logical premature wear caused by certain samples
- damage caused by accidents
Validity
6 months
In event of failure
Contact your local CRISON dealer.
In 63. User manual
CRISON INSTRUMENTS, S.A.
Riera Principal 34-36
08328 ALELLA - Barcelona
www.crisonintruments.com
After sales service
Tel. +34 935 550 318
Fax. +34 935 400 857
E-Mail: service @ crison.es
21