Service, Maintenance; Eu Declaration Of Conformity - Blitz Automatic 3 Manual De Instrucciones

Operating Instructions

Service, Maintenance

Fault message E-5
Cause
Environmental pressure compensation is not
possible
Filling hose is kinked
7 Service, maintenance
• If the seal of the valve plug starts leaking,
it has to be replaced by a replacement
seal.
• Check the filter water separator for soiling
and condensation water in regular inter-
vals.
Otherwise the unit does not need any mainte-
nance.
109493 07/11
Remedy
Open the valve plug
Check the filling hose
8

EU Declaration of Conformity

in keeping with the EEC low-voltage guideline
(73/23/EWG)
We
BlitzRotary GmbH
Hüfinger Straße 55
D-78199 Bräunlingen
declare in sole responsibility that the product
Automatic 3
to which this declaration refers, meets the
pertinent safety and health requirements of
the EU Directive mentioned above.
In order to ensure the correct implementation
of the health and safety requirements menti-
oned in the EU directives, the following stan-
dards are used for reference:
• EN 55 014
• EN 60335-1
Bräunlingen, 30th June, 2011
C. Rohde, Managing Director
11