Saftey; Safety Instructions In This; Manual; Workplace Safety Instructions - Blitz Automatic 3 Manual De Instrucciones

Operating Instructions
Table of contents
Table of contents
1 Saftey ..................................................... 7
1.1 Safety instructions in this .................... 7
manual .................................................... 7
1.2 Workplace safety instructions .............. 7
1.3 Requirements on the location .............. 8
2 Technical data ...................................... 8
2.1 Floor stand / wall-mounted device ...... 8
3 Installation ............................................ 8
4 Initial operation ................................... 9
4.1 Opening the floor stand ........................ 9
4.2 Opening the wall-mounted unit ........... 9
5 Operation ............................................. 10
6 Faults, causes, remedies .................. 10
7 Service, maintenance ....................... 11
8 EU Declaration of Conformity ........ 11
9 Spare part list ..................................... 27
109493 07/11
1

Saftey

1.1

Safety instructions in this

manual

Danger
Risk to life and limb.
Warning
Material damage.
Information and tips.
1.2

Workplace safety instructions

The tyre pressure controller has been de-
signed and built under observation of the
pertinent fundamental safety and health re-
quirements in the relevant EU directive(s).
Danger
However, this product may be a hazard,
if it is not used in accordance with the
requirements.
Every person who is involved with the instal-
lation, initial operation and maintenance of
the device has to have read and understood
the complete operating instructions. The tyre
pressure controller is intended for the delivery
of air exclusively. Any other use as well as
modifications to the device shall be consid-
ered unintentional. The manufacturer shall
not be liable for any resulting damage; the
operator alone shall bear the risk. The intend-
ed use shall also include the adherence to the
instructions on installation, initial operation,
operation and maintenance prescribed by the
manufacturer. All work dealing with the instal-
lation, initial operation and adaptation shall
have to be carried out by expert staff only. As
the case may be, the local safety and accident
prevention regulations shall be applicable for
the operation of the device.
7