tau DC17 Guía Para La Instalación página 22

PHOTOCELLS
17 - 19 2 PAIR (N.C.)
st
(19= Common)
EMERGENCY
19 - 20 (N.C.)
(19= Common)
CLOSE/LATCHING
RELAY
(N.O.)
19 - 21
DIP # 7 on SW1 on
OFF
(19= Common)
CLOSE/LATCHING
RELAY
19 - 21
(N.O.)
DIP # 7 on SW1 on ON
(19= Common)
22 - 23 NOT USED
SIDE SENSOR
22 - 24 (N.C.)
(22= Common)
STOP/
ANTI-PANIC
22 - 25
(N.C.)
(22= Common)
NOTE: The STOP lock/function blocks any movement in progress of the automation,
while the ANTI-PANIC lock/function stops the movement in progress of the auto-
mation and then resumes with a slow closing once the function is restored.
26 - 27
MECHANICAL
28 - 29 SWITCH
WARNING: In case neither the mechanical selector it is necessary to jumper
wire terminals 26 - 28.
Closed None.
Opening None.
Closing Reverts motion and opens.
Open Door won't close until photocells are released.
In pause None.
Opens in any program, except in "LOCKED". When
Closed
dip # 1 on SW1 is set on ON opens also in "LOCKED".
Opening None.
Closing Reverts motion and opens.
Open Door won't close until input is released.
In pause None.
Closed None.
Opening Reverts motion and opens.
Closing None.
Closes in any program, except in "HOLD OPEN".
Open
In pause None.
Opens in any program, except in "LOCK".
Closed
Reverts motion and closes, except in "HOLD OPEN".
Opening
Closing Reverts motion and opens, except in "LOCK".
Closes in any program, except in "HOLD OPEN".
Open
IMPORTANT: Auto Close function is disabled.
In pause Closes.
Closed None.
Opening Opening continues at reduced speed.
Closing None.
Open None.
In pause None.
Closed The door does not open so long as the input is busy.
Opening It stops the automation.
Closing It stops the automation.
Open The door does not close so long as the input is busy.
The door does not open so long as the input is busy.
In pause Once free, the door closes at reduced speed after 5
seconds.
Connections:
26= Common
27= Switch B0
28= Switch B1
29= Switch B2
22
Selector Control Panel
1
2
3
4
26
27
28
29