Parameter Setting - Orbis ANRET M-MULTI Manual De Uso

The user interface consists of six keys and an indicator lamp for each one
of these. Each key gives direct access to the display of the corresponding value.
The values are as follows, from top to bottom:
- voltage
- current
- active power ratings
- power factor
- total active energy
- total reactive energy
When the secondary menu is displayed and the parameters are being set, the
keys take on a different meaning, as shown in the right hand symbol column.
V
Voltage display / Page scroll
A Sys
Current display / System value display
W
Active power rating display / Increase active number
PF
Power factor display / Decrease active number
Wh OK
Display total active energy / Confirm value selected
varh Prg
Display total reactive energy / Select next parameter
Programming on initial installation
The programming menus are entered by holding down the "
three seconds.
The user programmable parameters are as follows, in order:
Primary TV (fixed secondary 230 V)
Primary TA (fixed secondary 5 A)
Zero active energy meter
Zero reactive energy meter
KEYS

PARAMETER SETTING

- 34 -
User's Manual - ANRET M-MULTI / Q-MULTI
" key for at least
varh Prg