Reference Standards - Orbis ANRET M-MULTI Manual De Uso

RESETTING THE INSTRUMENT
In the event of extraordinary operations following the installation of the instrument,
it may be necessary to reset it
k
To reset the instrument, hold down the "
approximately 3 seconds
The message "InStruMEnt rEStArt" will scroll through the screen, followed
by the confirmation menu
Select one of the "Yes" or "No" no options with the "
keys and confirm with "

REFERENCE STANDARDS

Conformity with the European Union directives:
73/23/EEC modified by 93/68/EEC (safety)
89/336/EEC modified by 92/31/EEC and 93/68/EEC (EMC)
is declared with reference to the following harmonised standards:
Safety:
EN 61010-1: safety provisions for electrical measurement, control and
laboratory instruments; Part I: general provisions
Electromagnetic compatibility:
EN 61000-6-2: electromagnetic compatibility (EMC)
Part 6-2: general standards - immunity for industrial environments
EN 61000-6-3: electromagnetic compatibility (EMC)
Part 6-3: general standards - Emissions for household, commercial and
light industrial environments
Metering provisions:
EN 61036: static active energy electricity meters for AC (classes 1 and 2)
EN 61268: static reactive energy electricity meters for AC (classes 2 and 3)
L1
k
M
V
L2
A Sys
W
L3
PF
Wh OK
M k
varh Prg
varh Prg
"
Wh OK
- 43 -
User's Manual - ANRET M-MULTI / Q-MULTI
L1
k
M
V
L2
A Sys
W
L3
PF
Wh OK
M
varh Prg
" and " " keys for
W
" and "
W
"
PF