Peg-Perego Culla Futura Instrucciones De Uso página 11

or dangerous objects that are within
reach of the child.
• Assembly and preparation of the
product must be carried out by adults.
• WARNING: before use make
sure that all of the attachment
mechanisms are connected properly.
• Do not insert fingers into the
mechanisms.
• Do not use accessories which are not
approved by the manufacturer.
• This product is designed for children
from birth up to the weight of 9 kg.
• WARNING: To avoid injury ensure
that the child is kept away when
unfolding and folding this product.
• WARNING: When lying, ensure that the
baby's head is not below the body.
• Before use, inspect handles and the
bottom of the carry cot for checking
presence of signs of damage and wear
• Make sure the handle is in the correct
position before lifting the carrycot.
• This product is designed to hold a
sleeping baby.
• Do not add or use mattresses
different from the original one.
COMBINED WITH CHASSIS:
• This product is compatible with
the following original PegPerego
products: Carrello Book, Scout,
Classico, Team, Duette Piroet, Carrello
Futura.
• WARNING: make sure all the
attachment devices are correctly
secured before use.
• WARNING: never leave the child
unattended.
COMBINED WITH STAND:
• WARNING: this product is compatible
with the following original
PegPerego products: Bassinet stand.
• WARNING: Do not use if any part
of the stand is broken, torn or
missing.
• WARNING: Do not let other children
play unattended near the carry cot
and stand.
The images referring to the textile details may
differ from the collection purchased.
For more information, consult our website:
www.pegperego.com.
Instructions for use
1 HOOD: to lift the hood completely, pull it until it clicks.
2 To lower the hood, press down on the upper part of same
and, at the same time, lower it (fig_a).
The hood comes with a sun visor. Pull the sun visor out
from the front edge of the hood (fig_b).
3 COVER: to secure the cover correctly, position it on the
carrycot and fasten the buttons on both sides. Cover
correctly fastened (fig_a).
The magnets can be used to fasten the cover to the hood,
11