Product Cleaning - Peg-Perego Culla Futura Instrucciones De Uso

to protect the child yet further against the elements. Fold
the cover upwards and fasten it to the magnets positioned
inside the hood (fig_b) .
4 CARRY HANDLE: the handle is built into the hood; to carry
the bassinet, raise the hood - if lowered - until it clicks and
hold onto the handle.
• Before lifting the carrycot, make sure the built-in
handle is correctly attached.
• Before lifting the carrycot, make sure the handle is in the
carrying position.
5 ROCKING POSITION: The base of the Culla Futura has a
special shape which allows you to rock the child when it is
placed on a flat surface.
Ganciomatic system
6 Ganciomatic is the quick, practical system that allows you
to attach the Culla Futura to the Ganciomatic clips of a
stroller or the base of a chassis.
To fasten the carrycot, position it on the stroller or chassis
and press down with both hands until it clicks.
Always enable the brake on the stroller or chassis before
fastening and unfastening the carrycot.
Ensure the carrycot is properly fastened.
• To release it, lift the lever on the Ganciomatic handle
(arrow_a) and lift the carrycot (arrow_b).
Removing the lining
7 REMOVING THE HOOD LINING:
To remove the hood, unbutton the 6 buttons on the lower
edge.
8 Press the buttons on the two attachments and remove the
hood.
9 remove the two rigid supports.
10 REMOVING THE INNER LINING:
Remove the mattress.
11 Remove the inner lining by opening the two zips on the
edge of the Culla Futura.
12 REMOVING THE OUTER LINING:
- Unfasten all the rubber bands as illustrated.
- Remove the outer fabric.
13 WARNING: when repositioning the outer lining, be sure
to pull the following elements out through the slots:
rings for fastening the vehicle kit (arrow_a),
release handle (arrow_b).
14 When placing the lining on the hood, ensure you insert the
rigid supports correctly. Insert the tube into the front edge
of the hood; ensure you centre the handle correctly.
15 Finally, slip the second metal support into the hood's inner
slot.
16 Fasten the hood to the appropriate supports and fasten
the 6 buttons.
Padding cleaning instructions
Brush the fabric parts to remove dust.
• When washing, closely follow the instructions stated on
the label sewn into the cover.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
• Do not remove stains with solvents and do not tumble dry.

Product cleaning

• This product requires a small amount of maintenance.
Cleaning and maintenance must only be carried out by adults.
• Keep all moving parts clean and if necessary lubricate
them with light oil.
• Clean the plastic parts periodically with a damp cloth. Do
not use solvents or similar substances.
• Brush the fabric parts to remove dust.
• Do not clean the polystyrene shock absorbing device with
solvents or other similar products.
• Protect the product from atmospheric agents: humidity,
rain or snow. Extended exposure to sunshine can cause
colour changes in many materials.
• Store the product in a dry environment.
• Remember to regularly ventilate the interior of the carrycot.
Culla Elite car kit
• Culla Futura can be installed in your vehicle by purchasing
the Culla Elite Car Kit.
• Only the Culla Elite Car Kit should be used to fasten to Culla
Futura to your vehicle securely.
12