Installation Declaration; Service And Repairs - Leister IGNITER BM4 Instrucciones De Funcionamiento

Installation declaration

(as defined by the EC Machinery Directive 2006/42; Annex II B)
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland hereby declares that the
incomplete machine
Designation
Type:
- insofar as is possible from the package supplied – corresponds to the applicable fundamental requirements of
the EC Machinery Directive (2006/42).
The incomplete machine furthermore corresponds to the requirements of the following EC directive(s):
EC directive(s):
Harmonised standards:
We further declare that the special technical documents according to Annex VII (Part B) have been compiled for
this incomplete machine and that we are obliged to communicate this electronically to the market supervisory
authorities upon a justified request to do so.
Name of the documentation officer: Patrick Rieder, Compliance Manager The commissioning of the incomplete
machine is prohibited until it may be determined that the machine in which the incomplete machine has been
installed corresponds to the provisions of the EC Machinery Directive (2006/42).
Kaegiswil, 28.05.2013
Disposal
Power tools, accessories and packaging should be recycled. For EU countries only: do not dispose
of power tools in your household rubbish! According to European Directive 2002/96 on waste electrical
and electric equipment and its implementation in national law, power tools which can no longer be
used must be collected separately and recycled.

Service and Repairs

• Repairs should only be carried out by authorised Leister Service Centres. They guarantee a correct and reliable
repair service within reasonable period, using original spare parts in accordance with the circuit diagrams
and spare parts lists.
Guarantee
• This device comes with a basic guarantee of three (3) years from the date of purchase (proof of purchase
is an invoice or delivery receipt). Damage which arises will be rectified by replacement or repair. Heating elements
are excluded from the guarantee.
• Other claims are excluded, subject to legal requirements.
• Damage due to wear and tear, overload or improper treatment is excluded from the guarantee.
• Claims for devices which have been converted or modified by customers are void.
10
Hot-air blower
IGNITER BM4; IGNITER BR4
Electromagnetic Compatibility 2004/108
Low Voltage Directive 2006/95
RoHS Directive 2011/65
EN 12100-1, EN 12100-2, EN 14121-1,
EN 55014-1, EN 55014-2, EN 61000-6-2,
EN 61000-3-2, EN 61000-3-3, EN 62233,
EN 60335-2-45, EN 50581
Bruno von Wyl, CTO Beat Mettler, COO