Installation Declaration - Leister MONO SYSTEM Instrucciones De Funcionamiento

Installation declaration

(Pursuant to EC Machinery Directive 2006/42; Appendix II B)
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil / Switzerland hereby declares that
the incomplete machine
Designation:
Model:
Version:
- insofar as is possible with respect to the scope of delivery - is in compliance with applicable basic requirements of
the EC Machinery Directive (2006/42).
The incomplete machine is furthermore in compliance with the requirements of the following EC Directive(s):
EC Guideline(s):
Harmonized standards:
Furthermore, we declare that the special technical documents according to Annex VII (Part B) were prepared for
these incomplete machines, and we agree to transmit them electronically to the market surveillance authorities
upon justified request.
Name of the authorized document official: Volker Pohl, Manager Product Conformity
Commissioning of the incomplete machine is forbidden until it has been determined if need be that the machine
that was installed in the incomplete machine is in compliance with the stipulations of the EC Machinery Directive
(2006/42).
Kaegiswil, 6/24/2015
Disposal
Electrical equipment, accessories and packagings should be subjected to environmentally friendly
recycling. For EU countries only: Do not dispose of electrical equipment with household refuse! In
accordance with European Guideline 2002/96 regarding waste electrical and electronic equipment
(WEEE) and its implementation in national laws, electrical equipment that can no longer be used must
be collected separately and subjected to environmentally friendly recycling.
14
High-pressure blower
MONO
SYSTEM
Electromagnetic Tolerance 2004/108
Low-voltage Directive 2006/95
RoHS Directive 2011/65
EN 12100, EN 55014-1, EN 55014-2, EN 61000-6-2, EN 61000-3-2,
EN 61000-3-3, EN 62233, EN 60335-1, EN 50581
Bruno von Wyl, CTO Andreas Kathriner, GM