Installation Declaration; Service And Repairs - Leister IGNITER Serie Instrucciones De Funcionamiento

Installation declaration

(as defined by the EC Machinery Directive 2006/42; Annex II B)
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland hereby declares that the
incomplete machine
Designation
Type:
- insofar as is possible from the package supplied – corresponds to the applicable fundamental requirements of the
EC Machinery Directive (2006/42).
The incomplete machine furthermore corresponds to the requirements of the following EC directive(s):
EC directive(s):
Harmonised standards:
We further declare that the special technical documents according to Annex VII (Part B) have been compiled for
this incomplete machine and that we are obliged to communicate this electronically to the market supervisory
authorities upon a justified request to do so.
Name of the documentation officer: Volker Pohl, Manager Product Conformity
The commissioning of the incomplete machine is prohibited until it may be determined that the machine in
which the incomplete machine has been installed corresponds to the provisions of the EC Machinery Directive
(2006/42).
Kaegiswil, 15.10.2018
Disposal
Electrical equipment, accessories and packaging should be recycled in an environmentally fri-
endly way. For EU countries only: Do not dispose of electrical equipment with household refuse!

Service and Repairs

• Repairs should only be carried out by authorised Leister Service Centres. They guarantee a correct and reliable
repair service within reasonable period, using original spare parts in accordance with the circuit diagrams
and spare parts lists.
Guarantee
• For this tool, the guarantee or warranty rights granted by the relevant distributor/seller shall apply. In case of
guarantee or warranty claims any manufacturing or workmanship defects will either be repaired or replaced by the
distributor at its discretion. Warranty or guarantee rights have to be verified by an invoice or a delivery document.
Heating elements shall be excluded from warranty or guarantee.
• Additional guarantee or warranty claims shall be excluded, subject to mandatory provisions of law.
• Warranty or guarantee shall not apply to defects caused by normal wear and tear, overload or improper handling.
• Warranty or guarantee claims will be rejected for tools that have been altered or changed by the purchaser.
10
Hot-air blower
IGNITER BM4; IGNITER BR4
2014/30, 2014/35, 2011/65
EN ISO 12100, EN 55014-1, EN 55014-2, EN 61000-6-2, EN 61000-3-2,
EN 61000-3-3, EN 62233, EN 60335-2-45, EN 50581
Bruno von Wyl, CTO Christoph Baumgartner, GM