Menu Functions; Scan; Pri (Priority Scan); Vox - Midland G18 Manual De Instrucciones

MENU functions

Here below is a list of the default functions that you will find in the menu
of this radio.
First of all, you have to push the MENU button to enter and find the de-
sired function.

Scan

This function is enabled by pushing the Function key 2 for 3 seconds; you
will see the channels scanning on the display of the radio.
Whenever any signal is detected, the scanning will stop on a busy chan-
nel and, if no operation is done, will start after 5 seconds.
If you press the PTT, the radio will transmit on the latest busy channel;
after about 5 seconds that you released the PTT, the scanning will be
active.

PRI (Priority Scan)

When you activate this function, the radio will alternately scan the stan-
dard channels and the priority one. The priority channel can be selected
only with the programming software. The default priority channel is CH1.

VOX

The VOX feature enables hands free conversations without using PTT:
just speak in the direction of the microphone and the communication
will be automatically activated.
The VOX sensitivity can be adjusted in 10 different levels (0,1,2,3...9)
through the Menu or programming software :
OFF means that the VOX is turned off, level 1 is set by default and has the
lowest VOX sensitivity, 9 is the highest one.
To activate the VOX levels, follow these steps:
1. Press the MENU button;
2. Turn the Encoder knob until the display shows "VOX";
3. Press the ENT key;
Midland G18 instruction guide | 37