Scrambler; Led - Backlight - Midland G18 Manual De Instrucciones

when no signals are present.
Squelch must always be adjusted when no signals are present.

Scrambler

The scrambler is designed to protect communications.
This feature prevents parties from other networks from hearing and un-
derstanding voice communications.
To enable/disable the scrambler:
1. Press the MENU button;
2. Turn the Encoder knob until "SCRM" is displayed;
3. Push ENT to enter the function;
4.
Turn the Encoder knob to activate/deactivate the SCRAMBLER: "ON"
(to activate it), or "OFF" (to deactivate it);
5. Confirm your selection with ENT.
When the scrambler is enabled, it is not possible to clearly receive com-
munications. Therefore, before enabling it, it is necessary to make sure
that all the radios you wish to communicate with have enabled this fea-
ture, otherwise you won't be able to talk with them.
The scrambler of the transceiver does not fully guarantee the safety of
communications.

Led - Backlight

To enable/disable the LCD backlight:
1. Press the MENU button;
2. Turn the Encoder knob until "LED" is displayed;
3. Push ENT to enter the function;
4. Turn the Encoder knob to activate/deactivate the Backlight.
There are 3 available options: "ON", "OFF" and "AUTO".
AUTO: the display backlight activates when you press any key and
lasts a few seconds.
OFF: back light off.
ON: backlight always on. Attention: in this mode the power save is
off, therefore the battery consumption will increase.
5. Confirm your selection with ENT.
Midland G18 instruction guide | 39