Clatronic FU 7025 Manual De Instrucciones página 41

2. Use the buttons UP and DOWN for setting.
3. Press the ALARM button for confirmation. The minutes start to flash.
4. Use the buttons UP and DOWN for setting.
5. Press the ALARM button. The alarm time is stored.
Activating or Deactivating Alarm Time
• Press the ALARM button to activate or deactivate the alarm time.
• When the alarm time has been activated, the " " symbol will appear.
• A beep will sound when the set alarm time is reached. The intensity of the beep
increases slowly.
NOTE:
If the alarm is not interrupted, the beep switches off by itself after two minutes.
Turning Off the Alarm
Press the ALARM button to stop the alarm.
Automatic Alarm Interval
The automatically set alarm function can be shut off for approximately 5 minutes with
the LIGHT / SNOOZE button. The symbols " " and " " in the display start flashing.
Cleaning
CAUTION: Do not immerse the device in water.
• Clean the device with a soft damp cloth without detergents.
• Dry well with a dry, soft cloth!
41
FU7025_IM_CTC - 107x107mm 23.01.18