Replacing The Blades - Sinmag Europe IPSO Manual Del Usuario

7. REPLACING THE BLADES

NOTE: Make sure that you wear protective gloves when replacing the blades
or carrying out operations in the vicinity of the blades. Also make sure that the
machine is isolated from power supply before doing these works.
1. Remove the bagging spade.
2. Remove the front tablet.
3. Unscrew the bolts as shown in following photos.
Tilt the cover that protects the knife frames
4. Loosen the screws fastening the frame to the machine body.
Loosen the screwes fastening the frame to the pivot axe.
Then turn down the front frame.
ENG
23