Insert / Eject Discs - Phonocar VM015 Instrucciones Para El Montaje

Insert / Eject discs

Switch-on DVD-player before inserting or ejecting Disc
1 Insert disc with label showing upward.
Insert disc half-way. Player will take the disc automa-
tically.
Note:
In case of wrongly inserted (label downward) or dirty disc, the display will show INCORRECT DISC FORMAT.
In such case, eject disc. Never introduce objects into the disc-slot, as this could damage the DVD-player.
Remarks to the present Instructions Manual
This Instructions Manual supplies all basic information on this DVD-player.
Some DVDs are suitable for a specific or limited reproduction. That is why the DVD-player may not always react to all
commands. This is not a defect of the DVD-player: simply read the DVD-disc instructions.
USB - SD CARD: remarks and compatibility
Note: Always check the compatibility between the Player and the USB / SD-CARD, as certain USB or SD-CARDs may
not be recognized or present difficulties for the Player.
If the USB or SD-CARD is not recognized by the Player, proceed as follows:
Take USB/SD-CARD away. Switch Player off and on again. Insert USB/SD-CARD again.
1 Insert SD/MMC-Card
Insert the SD/MMC-Card with its label showing upward.
The Player will automatically reproduce the contents of
such card, while the display will indicate READ-CARD.
2 Eject SD/MMC-Card
Press Source-key to leave the READ-CARD-function.
Slightly press onto the SD/MMC-card to unlock and
extract the card.
2 Eject disc
Press EJECT. Disc will come out automatically.
3 Insert USB
Insert the USB-card into the related slot. The Player will
automatically reproduce the contents of the USB, while
the display will indicate READ-USB.
4 Eject USB
Press Source-key to leave the READ-USB-function. Ex-
tract the USB-card.
27
GB