Energic Plus UBC Manual De Uso E Instalación página 4

Carica batteria UBC
Protezioni e Sicurezza
Descrizione Simbolo
Isolamento
Isolamento
Isolamento
Corrente di dispersione (leakage)
Fusibile di ingresso
Fusibile di uscita
Tensione Minima di uscita per il
funzionamento (Sensore di Batteria)
Inversione di polarità in uscita
Protezione termica dei semiconduttori
(Temperatura di Allarme Termico)
Prescrizioni (norme) di Sicurezza
Prescrizioni (norme) EMC
D01236-01
Condizioni di Test Valore e/o
Range
- Morsetti di Alimentazione e
Morsetti di Batteria
- Morsetti di Alimentazione e
Terra
- Morsetti di Batteria e Terra
I Apparecchiatura alimentata
L
F1 Interno all'apparecchiatura 7 (ritardato)
F2 Interno all'apparecchiatura
- All'accensione
dell'apparecchiatura
- Messa in funzione Protezione
data dal
fusibile F2
- Ta=55°C
- EN60335-1, EN60335-2-29
EN55014-1, EN61000-3-3
-
EN55014-2, EN61000-4-2
EN61000-4-4, EN61000-4-5
EN61000-4-6, EN61000-4-11
Italiano English
Unità
1250 V
AC
500 V
DC
500 V
DC
< 3 mA
A
Explanation of Graphical Symbols
40 A
1,3 V/el
-
100 °C
- -
- -
This product is covered by warranty.
The relative warranty certificate is attached to the Instructions Manual.
If the Manual is not provided with this certificate, please ask your retailer for a copy.
For further references, please write the serial number in the proper space:
Information contained in this Manual relates to Energic Plus HF property which
reserves the right to supply for the exclusive use of customers.
No other use is allowed without a written authorization supplied by Energic Plus HF
Energic Plus HF will be not responsible for inaccuracies contained in this manual
due to print or translation errors. Energic Plus HF has the right to make changes or
improvements, also for the user interest, without prejudicing the essential
characteristic of operation and safety.
7 8
Battery charger UBC
ATTENTION: To reduce the risk of
electric shock, do not remove cover.
Refer servicing to qualified service personnel.
Disconnect the mains supply before connecting
or disconnecting the links to the battery.
Read the Instruction Manual carefully
before use. Verify that the selected
charge curve is suitable for the type
of battery You have to re-charge.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert
the user to the presence of uninsulated "dangerous voltage" within the equipment's enclosure;
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the equipment.
Serial No. _____________________
Copyright © 2003 by Energic Plus HF
Second Edition
D01236-01