Trevi MCX 1025 USB Manual De Uso página 16

ENGLISH
AUX IN
1. Use a 3.5mm Male-to-Male Stereo cable to connect any external audio device with a 3.5mm
Headphone or Line-Out jack to the AUX IN jack on the front panel of the stereo.
2 . Start playback on the external audio device. Adjust the volume on the audio device (do not set the
volume too high to avoid distortion). You may also adjust the volume on the appliance.
3. To control playback function, use the controls provided by the external audio device.
SNOOZE
SNOOZE must be after completed ALARM setting.
When the timer is triggered. You may press the "SNOOZE" button to delay the alarm for another
10 minutes.
EQ
Press and hold the "ALBUM" button, each press switch the EQ function as follows:
1 - C = CLASSIC
2 - R = ROCK
3 - P = POP
4 - J = JAZZ
5 - F = FLAT (NORMAL)
16
OTHER FEATURES
E-10
MCX 1025 USB