Cleaning / Sterilization Of The Breast Pump And Accessories; Cleaning; At-Home Sterilization - Kitett KOLOR PLAY Manual De Instrucciones

3. Cleaning / sterilization
of the breast pump and accessories
• Before using for the first time and after each use thereafter (and long periods of disuse)
a. Cleaning
- Rinse out all the elements comprising the breast pump, Kolor teat and
feeding bottle in cold water, then wash in hot soapy water.
- Rinse all the elements and assemble the two components comprising
the valve: the transparent valve and the positioning ring (making sure
that the valve is positioned correctly on the ring).
- Drain on a piece of kitchen paper, then leave to dry in the air.
You are advised to wash all parts in contact with breast milk immediately after breast pump
use. This makes cleaning easier and prevents the development of bacteria.
• Before using for the first time and regularly during use:
b. At-home sterilization
Sterilize all parts in boiling water (10 minutes minimum), in the dishwasher or in a microwave
sterilizer.*
* Consult the instructions provided by the microwave sterilizer manufacturer and do not exceed 1000 W.
If you sterilize in boiling water and if you have hard water, you may add a few drops of white
vinegar (2 or 3 drops) to avoid deposits forming on the components.
GB
25