Cleaning / Sterilization Of The Breast Pump And Accessories; Cleaning; At-Home Sterilization; Use - Kitett KOLOR PLAY Manual De Instrucciones

Cleaning / sterilization
of the breast pump and accessories
• Before using for the first time and after each use thereafter (and long periods
of disuse)
a. Cleaning
- Rinse out all the elements comprising the breast pump, Kolor
teat and feeding bottle in cold water, then wash in hot soapy
water.
- Rinse all the elements and assemble the two components
comprising the valve: the transparent valve and the positioning
ring (making sure that the valve is positioned correctly on the
ring).
- Drain on a piece of kitchen paper, then leave to dry in the air.
You are advised to wash all parts in contact with breast milk immediately after
breast pump use. This makes cleaning easier and prevents the development of
bacteria.
• Before using for the first time and regularly during use:
b. At-home sterilization
Sterilize all parts in boiling water (10 minutes minimum), in the dishwasher or in a
microwave sterilizer. (Recommendation for disinfection with microwave sterilizer :
800w-950w for 4 min)
If you sterilize in boiling water and if you have hard water, you may add a few drops
of white vinegar (2 or 3 drops) to avoid deposits forming on the components.

Use

a. Preparing the breast pump and its accessories
Illustration 4.a
1 - Wash your hands in soapy water before handling breast pump components.
Assemble the handle:
2 - Assemble the membrane and the base with the stem. Make sure the base fits
correctly against the membrane.
3 - Insert the whole assembly into the body of the breast pump and squeeze the rim
tightly to ensure a good watertight fit around the membrane.
4/5 - Clip the handle onto the body via the notches and horizontal bar (click).
GB
15