Bench-Mounted Operation - Festool EHL 65 E Instrucciones De Servicio

10.1 Chamfering
The front planer platen is equipped with a
90° V groove (2.11) to allow the chamfering
of workpiece edges. This V groove is 2 mm
deep, thus producing a 2 mm edge chamfer
with the chip thickness setting 0.

10.2 Bench-mounted operation

The planer can be operated bench-mounted
in conjunction with the bench-mounting
device SE-EHL (488 524). Detailed instruc-
tions are supplied with the accessories.
11 Accessories, tools
For your own safety, use only ori-
ginal Festool accessories and spare
parts.
The accessory and tool order number can
be found in the Festool catalogue or on the
Internet under "www.festool.com".
12 Maintenance and care
Always remove the power supply
plug from the socket before carrying
out any work on the machine.
All maintenance and repair work
which requires the motor casing to
be opened may only be carried out
by an authorised service centre.
The cool air openings in the motor casing
must always be kept clean and unobstruc-
ted to ensure air circulation.
The tool is fi tted with special motor brus-
hes with an automatic cut-out. When the
brushes become worn the power supply is
shut off automatically and the tool comes
to a standstill.
13 Warranty
Our equipment is under warranty for at
least 12 months with regard to material or
production faults in accordance with nati-
onal legislation.
In the EU countries, the warranty period
for exclusively private use is 24 months (an
invoice or delivery note is required as proof
of purchase).
Damage resulting from, in particular, nor-
mal wear and tear, overloading, improper
handling, or caused by the user or other
damage caused by not following the opera-
ting instructions, or any fault acknowledged
at the time of purchase, is not covered by
the warranty.
Complaints will only be acknowledged if
the equipment has not been dismantled
before being sent back to the suppliers or
to an authorised Festool customer support
workshop.
Store the operating instructions, safety no-
tes, spare parts list and proof of purchase
in a safe place.
In addition, the manufacturer's current
warranty conditions apply.
Note
We reserve the right to make changes to
the technical data contained in this infor-
mation as a result of ongoing research and
development work.
9