Overview Of The Components - Clatronic MRC 547 P Instrucciones De Servicio

5....-05-MRC 547 P plus CZ
GB
1 Lens
2 SLEEP button
3 ALARM button
4 Tuning band
5 LED display
6 TUNING control
7 SNOOZE button
8 Swiveling projector
9 LIGHT
10 TIME button
11 HOUR button
12 MIN button
13 Band selector (AM/FM)
14 VOLUME control - / + (Volume)
15 FOCUS control
16 LED display for activated
alarm function (AUTO)
Radio station tuning
Shift the function switch (21) to the ON position and select the desired frequency
with the band selector (13). FM = UKW, AM = MW. Select a station by turning the
TUNING control (6). The tuning scale (4) indicates the selected frequency.
Setting of the Clock
Hours: Press the TIME key (10) and the HOUR key (11) simultaneously.
Minutes: Press the TIME key (10) and the MIN key (12) simultaneously.
Setting of the Alarm
Hours: Press the ALARM key (3) and the HOUR key (11) simultaneously.
Minutes: Press the ALARM key (3) and the MIN key (12) simultaneously.
Radio alarm
• Once the alarm times are set and a radio station has been selected, shift the
function selector (21) to "AUTO". A dot in the display (5) appears next to AUTO
(16).
• As soon as the alarm time is reached, the radio is switched on. The selected
radio station plays at the set volume.
Buzzer alarm
• If you would not like to be woken up by the radio, turn the function switch (21) to
the BUZZ possession.
28
28.04.2003 8:53 Uhr

Overview of the Components

Putting into function
Reverse side
17 ON/OFF switch for projector
18 ON/OFF switch for light
19 Throw-out aerial
20 Battery compartment
21 Function selector switch
(ON/OFF/ AUTO/ BUZZ)
22 Function switch for
projector time adjustment (TIME)
23 HOUR button
24 MIN button
Seite 28