Overview Of The Components - Clatronic MRC 7008 Manual De Instrucciones

1 ON / OFF button
2 HOUR / TU− button
3 MIN / TU+ button
4 DIMMER / HIGH / LOW / OFF / SLEEP / SNOOZE button
5 AL1 / VOL− button
6 AL2 / VOL+ button
7 SET / PRE / M+ button
8 Indicator for radio switched on ( FM )
9 Indicator for activated alarm function 2 ( AL 2 BUZZER ) ( Buzzer )
10 Indicator for activated alarm function 2 ( AL 2 RADIO ) ( Radio )
11 LED display
12 Indicator for activated alarm function 1 ( AL 1 RADIO ) ( Radio )
13 Indicator for activated alarm function 1 ( AL 1 BUZZER ) ( Buzzer )
14 Indicator for switched off display ( DIM OFF )
Back Side ( not shown )
DC 5V power supply connection
Battery compartment ( power reserve )
USB OUT CHARGE charging socket
FM wire aerial
First Use of the Device / Introduction
• Select a proper place for the device. A dry, level and slip proof surface is suitable.
• Make sure the device is vented sufficiently!
• Remove the protective film from the device, if present.
• The display automatically switches to the time display after approx. 3 seconds.
Power Supply
1. Make sure the grid voltage corresponds to the figures on the rating plate.
2. Plug the power supply unit into a properly installed protective contact socket.
3. Connect the device with the power supply unit by plugging the jack of the power
supply device into the "DC
38
MRC7008_IM_CTC_IM

Overview of the Components

5V " jack.
12.10.17