Springlane Hanno Manual De Instrucciones página 25

Automatic functions (MODE)
• When the knob is on "MODE", screen
will be illuminated. Showing the time
and functions.
• Briefly touching the desired function
key will cause it to light up and start.
The remaining time is shown in the
middle of the display. Touching the key
again will stop the mix function, and all
the function keys will light up again.
• "P (Pulse)" mode will stop at once
when your finger is removed from the
button
1. Pulse function (P)
In the Pulse function (P) mode, the
device operates at maximum speed.
Press the "P" button to mix.
2. Smoothie function
The high-performance blender starts
automatically: The speed increases for
20 seconds, from slow to fast – three
times within one minute.
3. Crushed ice function
The high-performance blender will
start automatically: The blender
will crush the ice in intervals with
short pauses in between. The entire
operation lasts 20 seconds. Use ice
that is smaller than 2 cm.
4. Grinding function
The high-performance blender starts
automatically: Speed will increase till
to max speed, will stop by itself.
Stepless speed control
Turn the control knob from level MIN to
level MAX to get different speeds.
• High speed: turn the controller dial to
"MAX".
• Low speed: turn the controller dial to
"MIN".
Auto­clean function
This clean mode helps cleaning out sticky
food inside the jar. Detergent can be used
when necessary.
• To avoid overflowing, the container
should only be filled with max. 800 ml
of water.
• Turn the knob into this location, the
blender will be working with clean
mode.
• After machine stop, wash the jar again
simply again with water.
25