Sony BKM-250TG Manual De Instrucciones página 8

Specifications
General
Voltage +3.3 V, +5 V (supplied from the
main unit)
Power consumption
Approx. 4 W
Operating conditions
Temperature
0 °C to 35 °C (32 °F to 95 °F)
Optimum temperature
20 °C to 30 °C (68 °F to 86 °F)
Humidity 0% to 90% (no condensation)
Pressure 700 hPa to 1060 hPa
Storage and transport conditions
Temperature –20 °C to +60 °C (–4 °F to
+140 °F)
Humidity 0% to 90%
Pressure 700 hPa to 1060 hPa
Maximum external dimensions (w/h/d)
100 × 20 × 162 mm
(4 × 13
Mass Approx. 270 g (9.5 oz)
Input/Output connectors
Digital input
BNC (2), with monitor output
connector
Available signal format
Refer to the operating instructions of the
monitor.
Signal characteristics
Digital component signals
Sampling frequency
3G-SDI: Y/Cb/Cr (4:2:2)
148.5 MHz/74.25 MHz/
74.25 MHz
Y/Cb/Cr (4:4:4)
148.5 MHz/148.5 MHz/
148.5 MHz
G/B/R 148.5 MHz/
148.5 MHz/148.5 MHz
HD-SDI: Y/Cb/Cr
74.25 MHz/37.125 MHz/
37.125 MHz
SD-SDI: Y/Cb/Cr
13.5 MHz/6.75 MHz/
6.75 MHz
Quantization
8
Specifications
/16 × 6 1
/2 inches)
3G-SDI: 10 bits/sample, 12 bits/
sample
HD-SDI: 10 bits/sample
SD-SDI: 10 bits/sample
OUT connector (monitor out)
Output signal amplitude:
800 mVp-p ±10%
Output impedance: 75Ω
unbalanced
Transmission distance
3G-SDI: 70 m (approx. 230 ft)
max. (When using 5C-FB
coaxial cables (Fujikura. Inc.)
or equivalent.)
HD-SDI: 100 m (approx. 328 ft)
max. (When using 5C-FB
coaxial cables (Fujikura. Inc.)
or equivalent.)
SD-SDI: 200 m (approx. 656 ft)
max. (When using 5C-2V
coaxial cables (Fujikura. Inc.)
or equivalent.)
Time code display
Available standard
SMPTE-12M-2
Time code type
VITC, LTC
Notes
• Not available for analog signal.
• Depending on the SCAN setting of the
monitor, a part of the displayed picture
including the time code may be invisible.
Audio level meter display
Channel
CH1 to CH8 or CH9 to CH16
Level
–60 dB to –0.01 dB
Color
–0.01 dB to 0 dB: Red
–1.25 dB to –0.01 dB: Orange
–20 dB to –1.25 dB: Yellow
–60 dB to –20 dB: Green
Note
Depending on the SCAN setting of the
monitor, a part of the displayed picture
including the audio level meter may be
invisible.