Control And Command Equipment Lme 22 - baltur TBG 85 P Manual De Instrucciones

CONTROL AND COMMAND EQUIPMENT LME 22...

Operation, indications, diagnostics
RED
YELLOW
EK
GREEN
Both lockout reset button (EK) and signal lamp (LED) are located under the transparent cover of the lockout reset button.
There are 2 diagnostics choices:
1. Visual indication directly on the reset button: operation and diagnostics of device status.
2. Diagnostics with interface: in this case the OCI400 connecting cable is necessary and it can be connected to a PC with ACS400
software, or to gas analysers of different manufacturers (see technical sheet 7614).
Visual diagnostics:
During operation, the command and control device phase is indicated on the reset button. The following table lists all colour sequences
and their meaning. To activate the diagnostics function, hold the reset button down for at least 3 seconds. A quick red flashing indicates
that the function is active (see data sheet 7614). Likewise, hold the reset button down for at least 3 seconds to deactivate the function (the
switching will be indicated with a flashing yellow light).
Colour code table
Status
Waiting time "tw", other waiting states
Ignition phase, controlled ignition
Operation, flame O.K.
Operation, flame not O.K.
Extraneous light when burner startup
Undervoltage
Error code output (refer to «Error code table»)
Extraneous light upon burner start-up
Interface diagnostics
No light Red
The reset button «EK...» is the main element to access all diagnostic functions (activation
and deactivation), and serves to unlock the command and control device.
The multicoloured «LED» indicates the command and control device status during both
operation and diagnostics functions.
Operating
position
Diagnostic
Command and control device status indication
Yellow
0006081041_201401
Operating
position
interface
Colour code
. . . . . . . . . . . . . . . .
Green
12 / 24
Colour
Off
Flashing yellow
green
Flashing green
Yellow-red
Red
Flashing red
Alternating Green and Red
Flashing red light