Setting The Fan Speed; Setting The Timer (Remote Control Only) - Proline PAC8K Manual De Instrucciones

Setting the fan speed

 Repeatedly press
operate the auto fan speed automatically.
 Repeatedly press
will illuminate to indicate which speed setting is in use.
NOTE: If the appliance is in auto and dehumidification modes, you can not select the fan speed.

Setting the timer (remote control only)

You can set the timer for both delay start and delay stop.
Programming the timer for ON – when the appliance is OFF.
1. Press and the remote display will show
2. Repeatedly press
hour increments up to 24 hours.
 Press and hold
 When the timer is set, the timer indicator light will illuminate.
3. When the set time has been reached, the appliance will turn on automatically.
Programming the timer for OFF – when the appliance is operating.
1. Press and the remote display willl show
2. Repeatedly press
hour increments up to 24 hours.
 Press and hold
 When the timer is set, the timer indicator light will illuminate.
3. When the set time has been reached, the appliance will turn off automatically.
Programming the timer for ON and OFF at the same time
You can follow the steps above to set the Timer On and Timer Off functions at the same time.
Example: Set the appliance to turn on after 6 hours, operate for 2 hours, then turn off the appliance.
on the control panel until the fan indicator light illuminates. The appliance will
on the remote control to select the fan speed. The corresponding indicator light
to change the time in half an hour increments up to 10 hours, and then in 1
for fast setting.
to change the time in half an hour increments up to 10 hours, and then in 1
for fast setting.
.
.
11