Publicidad
Idiomas disponibles
Idiomas disponibles
Grille Installation: Mount the KM Subwoofer with four of the enclosed stainless steel screws in
the order outlined. Position the grille into place and mount the remaining stainless steel screws in
the order outlined. If applicable, utilize the enclosed stainless steel U-type speed clips. Mount the
grille right side-up to take advantage of the grille's integrated moisture draining system. See Figure
6.
3
Figure 6
KM subwoofers will handle massive amounts of power in any of the recommended
enclosures, minimum or maximum. The smaller enclosures are best for use in
limited-space applications. The larger recommended enclosures will yield slightly
more bass at the lowest frequencies.
Pro Tip: You are one ZXM Amplifi er and a few cables away from a complete, high-quality system
with rock-solid bottom end as only available from KICKER! Please ask your dealer about KICKER
ZXM amplifi er upgrades.
Note: KICKER Marine speakers use the highest level of magnetic shielding available to minimize compass and gauge
deviation in your dash. KICKER Marine speakers meet or exceed industry standards for environmental humidity and
corrosion, and for material degradation due to UV exposure. All specifi cations and performance fi gures are subject to
change.
Please visit www.kicker.com for the most current information. To get the best performance from your new KICKER
Subwoofer, we recommend using genuine KICKER Accessories and Wiring. Please allow two weeks of break-in time for
the subwoofer to reach optimum performance. The use of a subsonic fi lter will signifi cantly increase the power handling.
The power handling specifi cations in these charts are calculated using a 25Hz, 24dB per octave subsonic fi lter.
2011 KM Sub RevB.indd 5
2011 KM Sub RevB.indd 5
Downloaded from
www.Manualslib.com
1
2
A Note on Power Handling Capacity
manuals search engine
5
4
7
8
6
5
1/27/2011 10:09:25 AM
1/27/2011 10:09:25 AM
Publicidad
