Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
6 PROCEDURES
1 Deleting the Memory (default settings)
Phase
Description
Press and hold the programming button of the MINI-RX until the LED on the receiver performs a
1
blink and the buzzer performs an acoustic warning.
2
After about 1 second by the release of the button, the LED on the receiver emits five flashes.
3
Press the button of the receiver during the third flash.
4
If cancellation is successful the receiver will emit 3 short flashes and 3 acoustic warnings.
5
End
2 Remote Controls Memory Erasure
Phase
Description
Press and hold the programming button of the MINI-RX until the LED on the receiver performs a
1
blink and the buzzer performs an acoustic warning.
2
After about 1 second by the release of the button, the LED on the receiver emits five flashes.
3
Press the button of the receiver during the 4th flash.
4
If cancellation is successful the receiver will emit 5 short flashes and 5 acoustic warnings.
5
End
Example
Example
19
Publicidad
Capítulos
Tabla de contenido
