TELEPHONE INTERFACE
Ring cadence (RC / Ring Cadence): 1..9" [3]. Time interval between two consecutive
call tones when calling from a street panel.
Conversation mode with the entry panel: [Full-Duplex (FD)]. Available audio modes:
Full-Duplex, Half-Duplex, Simplex.
Conversation modes with forwarded calls: [Full-Duplex (FD)]. Available audio modes:
Full-Duplex, Half-Duplex, Simplex.
Notes:
Audio modes:
- Full Duplex (FD): The input audio channels (panel to telephone) and output audio
(telephone to panel) are opened simultaneously.
- Half Duplex (HD): The input and output audio channels are open, but only once each,
changing automatically from one function to another relative to the audio level. The
output channel has priority.
- Simplex (S): Only one audio channel is active each time. The switch is performed
manually. The output channel is open by default.
CONFIGURATION
The Telephone Interface allows you to use the home phones to receive and answer calls from
the door intercom and you can also forward them externally via a telephone line.
Below are some examples with block diagrams.
Confi gurations
Typical
o
All of the telephones also perform electronic door entry system functions.
Telephone
USE
PRG
PWR
D
D
NC
C
NO
A
A
INTERFACE TELEFÓNICO
TELEPHONE INTERFACE
REF: 4545
SWITCH
PARÁMETRO / PARAMETER
1
SISTEMA / SYSTEM
2
MODO / MODE
3
ACCESO REMOTO / REMOTE ACCESS
VDS
4+N
ON
+
L
-
1
2
3
4
6
1 2 3
ON
1
2
3
Page 8
Line
LN
LN
TF
TF
Internal line
ON OFF
4+N VDS
MCM SCM
OK NOK
USB