Programming Via Pc; Programming: Access - Options - Fermax 4545 Manual De Instalador Y Usuario

TELEPHONE INTERFACE
there is no response after the ring tone confi gured time, the interface responds
with a special sound (4 beeps) asking for a PIN. If correct, all functions are available
as with the internal telephone: programming, connection to the street panel, door
open, activating the auxiliary relay....etc.
This connection is protected by a switch that activates / deactivates this function.
This function is useful when the administrator of the installation wants to modify some
parameter to avoid having to go to the location (for example: change the call number)
or activate the auxiliary relay remotely (for example: turning your heating on in a second
residence). For more details on this function see: Key 1 - PIN (0000...9999) [0000] and
Key 3 - Forward telephone numbers directory in Single Call (SCM) and Multiple
Call (MCM).


Programming via PC.

Since in some cases you must program a lot of information (like with the directory), we
recommend using a PC to confi gure the parameters. The PC can be connected via the
mini-USB interface and a proprietary software. The software is available at www.fermax.
com.

PROGRAMMING: ACCESS - OPTIONS.

You can access the programming mode from the interior telephone to confi gure all of the
available options.
Accessing Programming mode:pick up the telephone and before 3 seconds pass, press
# # #, confi rming access to programming mode via a confi rmation tone: beep-beep-beep.
The programming mode ends and returns to standby if no key is pressed for 30 seconds or
when you hang up the telephone or press the # key (whatever action occurs fi rst).
Notice:
- You can access programming mode from the FORWARD, STANDBY, or MCM statuses
via an internal telephone (without a PIN) or from a remote telephone (with a PIN).
The options available are:
Key Option
0 VDS interface Address (SCM) (001...199) [1] (programmed)
1 PIN (0000...9999) [0000]
2 No function
3 Telephone numbers directory in Single Call (SCM) and Multiple Call (MCM)
4 Timers
5 No function
6 Call tone cadence (1..9)". [3]
7 Forward activation.
8 Forward deactivation.
9 Audio Adjustments
# Exit
Notes:
- The default values are displayed between brackets [ ] for the different options.
- Confi rmation tones:
* Correct (OK): Beep-beep
* Incorrect (Not OK): Beep-bop
Page 22