Key 3 - Forward Telephone Numbers Directory: - In Single Call (Scm); In Multiple Call (Mcm) - Fermax 4545 Manual De Instalador Y Usuario

TELEPHONE INTERFACE
2. The interface will generate the call on the internal telephones and if there is no response
after the ring tone confi gured time, the interface responds with a special sound asking
for a PIN.
3. If you enter the pin correctly, the interface will generate the confi rmation tone (beep-beep)
and all functions are available like with the internal telephone: programming, connection
to the street panel, door open, activating the auxiliary relay....etc.
Notes:
- You can access this mode in any status FORWARD, STANDBY or MCM.
- This mode is only accessible if switch 3 is ON for security reasons.
-This function is useful when the administrator of the installation wants to modify some para-
meter to avoid having to go to the location (for example: change the call number) or activate
the auxiliary relay remotely (for example: turning your heating on in a second residence).
The available options are:
Key Option
* 1 Communication with panel 1 (VDS) or the default panel (4+N)
* 2 Communication with panel 2 (VDS)
* 7 Auxiliary Relay Activation during the auxiliary relay time (ART)
* 8 Auxiliary Relay Deactivation
# # #Accessing Programming Mode
# End of remote mode
Notes:
- The communication with the entry panel operates the same way as in the call forward, with
the same options being accessible.
- Once an option is selected, you can not select other options, except for the activation and
deactivation of the auxiliary relay.
-This status ends and returns to standby if no key is pressed for 30 seconds or when you
hang up the telephone or press the # key (whatever action occurs fi rst).
Key 3 - Forward telephone numbers directory in Single Call (SCM) and Multiple Call
o
(MCM)
The interface accepts different confi gurations and working modes. These are the available
modes:
In Single Call Mode (SCM) - (4+N and VDS Systems): The forward is made (if acti-
o
vated) and it is not answered from the internal phone, the fi rst directory number. It it
also isn't answered, the second number in the directory is attempted.
In Multiple Call Mode (SCM) - (VDS Systems): The interface converts the calls from
o
the entry panel to telephone numbers via the directory, that is a multi-call. For calls
generated from the entry panel (VDS), the telephone interface generates different
extensions or telephones.
Page 24