Measurement Menu - Fracarro SIG7531 Instrucciones De Uso

There is the OUTPUT menu on detail:
TS OUTPUT – To enable or disable the output Transport Stream on the back-panel.
RCA OUTPUT – To set the output RCA parameters.
• VIDEO FORMAT – To select the output video format among Letter box, Pan and Scan, Combined or
• Adapted 16/9.
• AUDIO TYPE OUT – To adjust the output audio type among MONO, MONO LANG 1, MONO LANG 2 or
STEREO.
• AUDIO LEVEL – To adjust the output audio level with values from 0 to 10 (step 1).
• STANDARD – To adjust the output standard video from PAL, PAL-N, SECAM-L,NTSC-M or PAL-M.
MEASURES
Bit Error Rate measurement
of the input signal
Signal to Noise Ratio
measurement of the
input signal
Information for OFDM
modulation parameters

5.3.7 MEASUREMENT MENU

SOFTWARE REL.
BER
S/N (dB)
PARAMETRI OFDM
Read only
Display for code rate type
Display for guard interval
Confirm the settings by pressing the
pressing the S key after the modules programmation.
MODULAZIONE
GERARCHIA
CODE RATE
INT. DI GUARDIA
Display for carriers
number
key; save the settings by
26
SIG7531 v. 0
Read only
SIG7540 v. 0
1,3e-6
1 = not synchronized signal
24
0 = not synchronized signal
QPSK
16-QAM
64-QAM
None, 1, 2, 4
½, 2/3, ¾, 5/6, 7/8
¼, 1/8, 1/16, 1/32
2K, 8K
MODE
Read only
Read only