Product Details; Getting Started - Vortice AIRTEK 360 Manual De Instrucciones

ENGLISH

Product details

Air Quality
Indicator Light
PM2.5 Sensor
Cover
Power
Connector
Rear Air
Inlet

Getting started

1. Turn upside down the purifier after unpacking it to access the base cover.
2. Rotate the base cover counter-clockwise to remove the filter.
3. Remove the plastic cover from the air filter. Install the filter back into the air purifier and secure it by rotating
it clockwise
4. Attach the power adapter to its port in the back of the AirTek.
5. Insert the adapter to a power outlet.
6. Place the power switch located in the rear of the unit in the on position.
Touch Control
Panel
Top Air Outlet
Side Air Outlet
Vita-Ion Ionizer
Main Body
Base
Rotate to open
Base Cover
Five Stage
Composite Filter
UV Lamp
15