miniland baby digimonitor 3.5 touch Manual De Instrucciones página 27

time, even though there is no movement, touch the screen and the image will appear
again. To disable this feature and see the monitored area continuously, disable the MD
mode on the monitor.
MD mode OFF: The camera transmits continuously, enabling you to continuously monitor
your baby or the area you want to protect.
MD mode ON: The camera only transmits when it detects motion of sufficient intensity,
according to the level selected, around the camera.
To enable or disable this feature, click on the first of the icons that appear on the screen.
You must also select the camera's sensitivity level to motion detection from the 3 levels
available.
It also has an additional feature which allows the recording of images for a programmable
time period when the camera is activated on detecting a movement.
You can enable or disable this option by clicking on the icon and choose the length of
the recording period from the available options by clicking on .
· USB Output
You can configure the USB output (13) choosing one of three options:
Click on the check box next to the icon if you want a computer to work as a charger
when you connect the monitor to it using a mini USB-USB cable.
Select the option to display the image of your baby monitor on your computer or mobile
device via the eMyBaby platform (www.emybaby.com). You have to connect the monitor to
the USB port of a computer using a mini USB-USB*.
Check the box next to the icon if you want to access the data stored in the micro SD
card from a computer, which must be connected to the monitor.
Click OK to accept the selection.
Note: The micro SD memory card and the mini USB-USB cable are not included.
· Software update
This feature allows the Miniland technical service to access the software of your device in
order to carry out maintenance or troubleshooting.
WARNING: Never carry out software update tasks yourself. Contact the MINILAND
Technical Service if you have any problemas with the operation of your appliance.
· Vibrator Function
This feature allows parents to be in silence when they need peace and quiet and is a great
help in noisy surroundings and for the hard of hearing.
When the sound in the baby's room exceeds a certain threshold, the monitor vibrates to
alert the parents.
You can enable or disable the feature by clicking on the icon that appears on the
screen.
· Reset To Factory Default
This option allows you to return to the parameters and option initially programmed in the
factory.
To return to the initial configuration, check the YES box and accept the selection.