HEINE EN200 Instrucciones De Uso página 8

Hygienic Reprocessing
The instruction is available:
- at www.heine.com
- in a paper version which you can request from the address listed
Maintenance
The EN200, EN200-1 and the power supply are maintenance free.
Service
The device has no components serviceable by the end-user.
General Notes
The warranty for the entire product is invalidated if non-genuine HEINE products or non-original
parts are used and if repairs or modifications are made to the device by persons not authorized by
HEINE. For more information, please visit www.heine.com.
The expected life cycle, when the device is normal used and the warning and safety information as
well as the maintenance instructions are observed, is up to 7 years. Beyond this period, the product
may continue to be used if it is in a safe and good condition.
If you are using both devices in combination, the simultaneous operation of three XHL instruments
at maximum brightness is not permitted.
General Warnings
Use only CE marked USB power supplies (5 V) from reputable manufacturers that conform with the
safety requirements from the IEC 60950-1 Information technology or IEC 60601-1 Medical electrical
equipment.
Check the correct operation of the device before use! Do not use the device if there are visible
signs of damage.
The power supply must not be opened (risk of electrical hazard).
Use power supply in dry environment only. Avoid splashing water. Do not immerse in liquids.
Do not use the device in fire- or explosive risk area (e.g. oxygen saturated or anaesthetic
environments).
The device must not be placed near strong Magnetic fields, e.g. MRI units.
Do not modify the device.
Use only original HEINE parts, spare parts, accessories and power sources.
Repairs shall only be carried out by qualified persons.
Disposal
The product must be recycled as separated electrical and electronic devices. Please observe the
relevant state-specific disposal regulations.
The appendix contains following tables
- Electromagnetic disturbances – Requirements and tests
- Technical specification
- Explanation of the used symbols
8/44
MED 113066 2019-02-06