Remote Control; Frequently Used Operations; Display Indication; Resetting The Microprocessor - Pioneer MVH-S405BT Manual De Instrucciones

Remote Control

/
SRC (source)

Frequently used operations

Purpose
Turn on the power* Press SRC/OFF to turn
on the power.
Press and hold SRC/OFF
to turn off the power.
Adjust the volume Turn the M.C. dial.
Select a source Press SRC/OFF
repeatedly.
Change the display Press DISP/DISP OFF
information repeatedly.
Press and hold DISP/
DISP OFF to turn off the
display information.
Return to the previous Press BAND/
display/list
4
En
VOLUME +/–
MUTE
DISP (display)
Operation
Head Unit Remote Control
Press SRC to turn on the
power.
Press and hold SRC to
turn off the power.
Press VOLUME + or –.
Press MUTE to mute the
unit. Press MUTE again
or press VOLUME + or –
to unmute.
Press SRC repeatedly.
Press DISP repeatedly.
. Press /
next/previous folder.
Purpose
Return to the normal
display from the menu
Change the display
brightness
Answering a call
Ending a call
* When this unit's blue/white lead is connected to the vehicle's auto-antenna relay control
terminal, the vehicle's antenna extends when this unit's source is turned on. To retract the
antenna, turn the source off.

Display indication

Indication
BASS

Resetting the microprocessor

The microprocessor must be reset in the following situations:
to select the
– Before using this unit for the first time after installation
– If the unit fails to operate properly
Head Unit
Press and hold BAND/
.
Press and hold BAND/
.
Press .
Press .
Description
Appears when a lower tier of the menu or folder exists.
Appears when the button is pressed.
Appears when a traffic program is received.
Appears when the TA (traffic announcements) function is set
(page 17).
Appears when [HI]/[LOW] is selected in [D.BASS] (page 19).
Appears when random/shuffle play is set (except when BT AUDIO
is selected as the source).
Appears when repeat play is set (except when BT AUDIO is
selected as the source).
Appears when a Bluetooth connection is made (page 9).
Operation
Remote Control
–
–
Press .
Press .