Wireless Dmx Linking; Wireless Configuration - Chauvet DJ Freedom Flex H4 IP Guía De Referencia Rápida

EN

Wireless DMX Linking

The Freedom Flex H4 IP can work with a DMX controller. Instructions for connecting and configuring this product for DMX
operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from www.chauvetdj.com.

Wireless Configuration

The Freedom Flex H4 IP can be operated in wireless D-Fi mode. For more information about configuring this product to
transmit or receive in wireless D-Fi mode, download the Freedom Flex H4 IP User Manual from the Chauvet website.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 501.
Master/Slave Connection
The Freedom Flex H4 IP uses the wireless DMX data connection for its Master/Slave mode. Information about
configuring the Freedom Flex H4 IP for Master/Slave operation is in the User Manual, which is available from the Chauvet
website.
You can wirelessly sync an unlimited amount of receivers to one transmitter.
To ensure strong signals, the units should be elevated 5 feet or higher off the ground or remain in an
unobstructed line of sight of each other.
IRC-6 (Infrared Remote Control)
The Freedom Flex H4 IP can be operated with the CHAUVET IRC-6. For more information about the IRC-6, download
instructions for the IRC-6 or the Freedom Flex H4 IP User Manual from www.chauvetdj.com.
5
QUICK REFERENCE GUIDE
Freedom Flex H4 IP
sends wireless
DMX signal to other
wireless products.
Freedom Flex H4 IP QRG Rev. 1