fadini Bart 350 Manual De Instrucciones página 21

Installer:
INSTRUCTIONS FOR END USERS
IMPORTANT: THE SWINGING GATE OPENER BART 350 IS AN ELECTRO-MECHANICAL AUTOMATION WHICH WORKS WITH REMOTE
CONTROLS, INCLUDING RADIO CONTROLS. THEREFORE, PROPER USE AND MAINTENANCE BY THE END USER ARE REQUIRED IN
ORDER TO SAFEGUARD THE SYSTEM AND PROTECT PERSONS, ANIMALS OR PROPERTY NEAR THE AREA OF GATE MOVEMENT.
ATTENTION: PERFORMING ANY OPERATIONS DIRECTLY OR INDIRECTLY ON THE MECHANICAL STOPS OR ON ELECTRONIC
CONTROL OR SAFETY EQUIPMENT IS STRICTLY PROHIBITED. ALL SYSTEM ADJUSTMENT, MAINTENANCE AND INSPECTION
OPERATIONS REQUIRE INSTALLER INTERVENTION.
ATTENTION: CALL THE SYSTEM INSTALLER AT FIRST SIGN OF ANY FAILURE OR MALFUNCTIONS.
UNLOCKING AND MANUAL GATE MOVING OPERATIONS:
OPERATIONS FOR RESTORING GATE LOCKING:
ATTENTION: ELECTRICAL POWER TO THE SYSTEM IS ONLY PRESENT IF THE GATE IS LOCKED
WITH MOTORS (LOCK SYSTEM ENGAGED).
...without removing it from
its house, turn the unlock
handle to a vertical position.
turn the handle up to the stop
underneath, without removing
it from its seat: power supply
will thus be disconnected from
the motor.
CLICK
Slowly move the gate until you can
hear the locking sound (with small
movements of the gate near the
hook, make sure the gate is locked
to the motor).
Instructions
Open the gate manually
Close and lock the handle with
the key and perform a complete
opening and closing cycle.
Only upon first cycle, the gate
moves slowly until it reaches
the gate stop.
pg. 31