EN
Important safety instructions
General installation conditions:
• Before handling or connecting the equipment,
please read this manual.
• In order to reduce the risk of fi re or electric shock,
do not expose the equipment to rain or moisture.
• Do not take the cover off the equipment without
disconnecting it from the mains.
• Do not obstruct the equipment's ventilation sys-
tem.
• Please allow air circulation around the equip-
ment.
• The equipment must not come into contact with
water or even be splashed by liquids. Do not pla-
ce containers with water on or near the equip-
ment if it is not adequately protected.
• Do not place the equipment near sources of heat
or in excessively moisture conditions.
• Do not place the equipment where it may be
aff ected by strong vibrations or knocks.
How to use the equipment safely:
• The powering supply of this product is: 207 - 253
V~ 50/60Hz.
• If any liquid or object falls inside the equipment,
please contact a specialized technician.
• To disconnect the equipment from the mains,
pull from the plug, and never pull from the cable.
• Do not connect the equipment until all the other
connections have been made.
• The mains socket that is going to be used to con-
nect the equipment should be located nearby
and should be easily accessible.
Description of the electrical safety
symbols:
• To avoid the risk of electric
shock,
do
not
equipment.
• This symbol indicates that the
equipment complies with the
safety requirements for class II
equipment.
• This symbol indicates that the
equipment complies with the
requirements of CE mark.
• Indoor use only.
5
open
the