Important Safety Instructions; General Installation Conditions - Televes MATV 4E/1S Manual De Instrucciones

EN

Important safety instructions

General installation conditions:

• Before handling or connecting the equipment,
please read this manual.
• In order to reduce the risk of fi re or electric shock,
do not expose the equipment to rain or moisture.
• Do not take the cover off the equipment without
disconnecting it from the mains.
• Do not obstruct the equipment's ventilation sys-
tem.
• Please allow air circulation around the equip-
ment.
• The equipment must not come into contact with
water or even be splashed by liquids. Do not pla-
ce containers with water on or near the equip-
ment if it is not adequately protected.
• Do not place the equipment near sources of heat
or in excessively moisture conditions.
• Do not place the equipment where it may be
aff ected by strong vibrations or knocks.
How to use the equipment safely:
• The powering supply of this product is: 207-
253V~ 50/60Hz.
• If any liquid or object falls inside the equipment,
please contact a specialized technician.
• To disconnect the equipment from the mains,
pull from the plug, and never pull from the cable.
• Do not connect the equipment until all the other
connections have been made.
• The mains socket that is going to be used to con-
nect the equipment should be located nearby
and should be easily accessible.
Description of the electrical safety
symbols:
• To avoid the risk of electric shock, do
not open the equipment.
• This symbol indicates that the equip-
ment complies with the safety requi-
rements for class II equipment.
• This symbol indicates that the equi-
pment complies with the require-
ments of CE mark.
6