Steam Ironing; After Use - Tristar ST-8911 Manual De Usuario

Instruction manual

STEAM IRONING

Note: For the first use, use the iron on an old
piece of fabric to ensure the soleplate and water
tank are completely clean.
• Fill the boiler and select the temperature as
described before.
• Plug the power cable into the wall outlet.
• Turn on the device by using the ON/OFF button,
the unit will be heated up.
• It will take around 5 minutes to produce
enough steam, the steam ready and empty
water tank indicator light will be illuminate
when the iron is ready for use.
• Note: Do not use the steam function before the
steam ready indicator illuminates.
• There are two ways to obtain steam,
o Press on the steam switch button beneath
the iron handle and keep it pressed. The
steam will stop when you release the button.
o By pressing the steam lock button steam and
8
slide the steam lock backwards, the iron will
steam now constantly.
Note: The first time the steam generator is used,
there may be some smoke and smell, this is not
harmful. They will not affect the performance and
will disappear rapidly.

AFTER USE

• Put the temperature knob on minimum
position.
• Turn off the device by using the ON/OFF
button.
• Unplug the power cable.
• Wait until the steam generator and the
soleplate are cooled down completely.
• Unscrew the boiler cap and pour out the
remaining water then place the boiler cap back
on the unit.