Technical Specifications - Trevi DAB 7F92 R Manual De Uso Y Conexiones

ENGLISH
On Level: indicates the brightness level of the display when
the device receives commands.
Dim Level: indicates the brightness level of the display when
the appliance is inactive.
Inactive standby: set a time after which the radio turns o
automatically (O = o ).
Language: allows you to select the system language.
Factory reset: allows you to restore all the settings to the
factory settings. Select Yes for restore.
SW version: software version installed.
DAB / DAB + RADIO
1. Select the DAB (Digital radio) mode.
2. Press the TU- (5) and TU + (6) keys to display and scroll
through the list of received radio stations. Press the
SELECT button / knob (7) to select the desired station.
3. By pressing the INFO button (4) it is possible to change the
display of information, if available, on the display.
4. By long pressing the PRESET key (3) it is possible to access
the menu of the radio station being played in one of the
20 available memories.
5. By pressing the PRESET key (3) it is possible to scroll throu-
gh the list of saved radio stations.
DAB / DAB + TRANSMISSION INFORMATION
In DAB mode, the display will show a series of information
about the station and the track being played.
1. Press the INFO button (4) repeatedly to change the infor-
mation displayed.
Note: not all DAB stations provide the information displayed by
the device.
If available, the following information is available:
DLS: displays information relating to the transmitted music
(artist, song title, etc.).
Program type: displays information relating to the type of
program transmitted.
Transmitter name: displays information relating to the service
transmitter.
Transmitter Number / Frequency: displays information on the
number and frequency of the transmitted DAB / DAB +
station.
Signal error index: displays information relating to the level of
signal errors and the intensity with which it is received.
Bit Rate: displays information relating to the compression
ratio of the current transmission.
Battery status.
Date: displays information relating to the date.
FM RADIO
1. Select the FM mode.
2. Press the TU- (5) and TU + (6) keys to manually search for
a radio station. Pressing the TUNE keys once, you make
a shift of 0.05 MHz, pressing them for a long time you
search until the rst strong signal is encountered.
3. By pressing the PRESET key (3) you can access the list of
stored FM radio stations. Select the desired radio station
to listen to it.
4. By long pressing the PRESET key (3) it is possible to access
the menu for saving the current radio station in one of the
20 available memories.
5. Repeatedly pressing the INFO button (4) will display various
information regarding the tuned radio (if available).
ALARM
2 alarm alarms are available.
To set and activate them, refer to the "Settings menu" section
under "System Setting" and "Alarm".
To postpone the alarm press the SELECT button, the alarm
will be activated again after 5 minutes, by pressing it several
times you can program the alarm to be reactivated up to 30
minutes.
To turn o the alarm clock alarm permanently press the
ALARM button (2).
Note: the alarm clock is only available if the radio is powered by
an external power supply.
AUX IN INPUT
1. Select the Aux Input mode.
2. Connect a 3.5mm Jack cable to the AUX IN socket (10) and
the other end to the external device. Start playback from
the external device.
HEADPHONE JACKS
1. Insert the headphones into the headphone jack (8).
2. Turn on the radio and adjust the volume.

TECHNICAL SPECIFICATIONS

Power supply: ..................................5V
Rechargeable battery: ..................3.7V
DAB frequency range: ...................174.928 - 239.200 MHz
FM frequency range: .....................87.5-108MHz
Dimensions: ......................................165 x 95 x 46 mm
Weight: ...............................................347 gr.
To avoid possible hearing
damage, limit the time listening
at high volumes
DAB 7F92 R
1A
2000mAh
7