Cleaning And Maintenance; Technical Data; Guarantee - AEG SR 4314 CD/MP3 Instrucciones De Servicio

Press a third time: The function is deactivated.
Programmed Repeat
with the PROGRAM Button
This can be used to program any desired sequence of tracks.
1. Press the STOP key (2).
2. Press the PROGRAM key (5). „01" for the storage location
lights up on the left of the display (8). The two right-hand
fi gures fl ash and indicate the track number; the letters
PROG also fl ash. Use the
to select the desired track and then press the PROGRAM
button (5) again.
3. Press the II PLAY/PAUSE key (3). The playback starts.
The selected track numbers are shown in the display in the
correct order. Press this button to pause briefl y the playback
(see II PLAY/PAUSE section).
4. Press once the STOP key (2) to stop the playback while
retaining the program.
5. To resume the playback of the program press fi rst the
PROGRAM key once and then the II PLAY/PAUSE key.
6. In order to delete the programme, please press the PRO-
GRAM button and then the
control lamp (6) goes off.
The device stops automatically once the entire sequence of pro-
grammed tracks is completed. The programmed order remains
in the memory until you change to the other mode, the CD is
removed from the CD drawer or the device is switched off.
It is possible to combine the programmed tracks with the repeat
function. After you have programmed and started the device,
please press the REPEAT button (4) up to three times and then
you can use the functions as described under „REPEAT".
Please note:
There are a number of different recording and compression
methods, as well as quality differences between CDs and self-
recorded CDs.
Furthermore, the music industry does not adhere to fi xed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is not a
malfunction of the device.

Cleaning and Maintenance

• Always remove the mains plug before cleaning the machine.
• Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.

Technical Data

Model: .................................................................... SR 4314 CD
Power supply: ........................................................ 230 V, 50 Hz
Power consumption: ...........................................................14 W
Battery operation: .............................6 x 1,5 V, Type UM2/LR 14
Output rating:............................................................60 W PMPO
05-SR 4314 AEG 33
SKIP buttons (11/10)
I I
STOP button (2). The PROG
Protection class: ...................................................................... ΙΙ
Radio section:
Frequency ranges: ......................VHF / FM 87,5 ~ 108 MHz
....................... MW / AM 525 ~ 1615 kHz
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!

Guarantee

The device supplied by our Company is covered by a 24 month
guarantee starting on the date of purchase (receipt).
During the life of the guarantee any fault of the device or its
accessories ascribable to material or manufacturing defects will
be eliminated free of charge by repairing or, at our discretion, by
replacing it. The guarantee services do not entail an extension
of the life of the guarantee nor do they give rise to any right to a
new guarantee!
Proof of the guarantee is provided by the proof of purchase.
Without proof of purchase no free replacement or repair will be
carried out.
If you wish to make a claim under the guarantee please return
the entire machine in the original packaging to your dealer
together with the receipt.
Defects to consumables or parts subject to wearing as well as
cleaning, maintenance or the replacement of said parts are not
covered by the guarantee and hence are to be paid!
The guarantee lapses in case of unauthorized tampering.
After the expiry of the guarantee
After the expiry of the guarantee repairs can be carried by the
competent dealer or repair service against the payment of the
ensuing costs.
Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of electrical equipment
in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on the
environment and human health.
This will contribute to the recycling and other forms of reutilisati-
on of electrical and electronic equipment.
Information concerning where the equipment can be disposed of
can be obtained from your local authority.
33
07.08.2006, 14:14:10 Uhr